RuggedCom Switch RS930L User Guide

RuggedVDSL™ RS930L  
6-Port Managed Ethernet Switch with Dual Port Ethernet over VDSL Uplinks  
Features and Benefits  
Ethernet Ports  
Up to two Ethernet over VDSL (EoVDSL) interfaces  
6 fast Ethernet ports (10/100BaseTX)  
Ethernet Over VDSL Port Characteristics:  
.Up to 5km LAN segments  
Symmetric data rates up to 35Mbps  
Asymmetric data rates up to 40Mbps  
Automatically selects fastest data rate based on distance  
and quality of cable  
TM  
eRSTP  
Software selectable to be master or slave  
Frequency Division Multiplexing (FDM)  
Cyber Security Features  
.
Multi-level user passwords  
.
SSH/SSL encryption  
.
Enable/disable ports, MAC based port security  
.
Port based network access control (802.1x)  
The RuggedVDSL RS930L is a 6 port industrially hardened,  
.
VLAN (802.1q ) to segregate and secure network traffic  
fully managed Ethernet switch supporting Ethernet over VDSL  
(EoVDSL) allowing up to 4km LAN segments over telephone  
grade cable (or other legacy serial cabling) at up to 35Mbps.  
The RS930L allows for aggregation of Ethernet enabled devices  
at a remote location back to the central control room with  
EoVDSL using existing telephone grade cable (or other legacy  
serial cabling). The RS930L can be configured with dual  
EoVDSL interfaces and is ideal for ring or loop network  
architecture and is the perfect solution for bringing Ethernet  
networking to applications where existing telephone wiring is  
already present, thus saving the considerable cost of installing  
new network cabling.  
.
Radius centralized password management  
.
SNMPv3 encrypted authentication and access security  
RuggedRated™ for Reliability in Harsh Environments  
.
Immunity to EMI and heavy electrical surges  
.
Meets IEEE 1613 (electrical utility substations)  
Exceeds IEEE 61850-3 (electrical utility substations)  
Exceeds IEC 61800-3 (variable speed drive systems)  
Exceeds IEC 61000-6-2 (generic industrial)  
.
.
.
.
Exceeds NEMA TS-2 (traffic control equipment)  
.
-40 to +85°C operating temperature (no fans)  
no fans or moving parts for improved reliability  
.
20 AWG galvanized steel enclosure  
Designed to operate reliably in harsh industrial environments the  
RS930L provides a high level of immunity to electromagnetic  
interference and heavy electrical surges typical of environments  
found in electric utility substations, factory floors or in curb side  
traffic control cabinets. An operating temperature range of -40°C  
to +85°C coupled with hazardous location certification, optional  
conformal coating and a galvanized steel enclosure allows the  
RS930L to be placed in almost any location.  
DIN or panel mounting options provide secure  
mechanical reliability  
Rugged Operating System (ROS™) Features  
.
Simple plug and play operation - automatic learning,  
negotiation, and crossover detection  
.
RSTP (802.1D-2004) and Enhanced Rapid Spanning Tree  
(eRSTP™) network fault recovery (<5ms)  
Quality of Service (802.1p) for real-time traffic  
VLAN (802.1q) with double tagging and GVRP support  
Link aggregation (802.3ad)  
IGMP Snooping for multicast filtering  
Port Rate Limiting and Broadcast Storm Limiting  
Port configuration, status, statistics, mirroring, security  
.Loss of link management on fiber ports  
SNTP time synchronization (client and server)  
.
The RS930L is packaged in a compact, galvanized steel  
enclosure that allows either DIN or panel mounting for efficient  
use of cabinet space. The RS930L provides an integrated  
power supply with a wide range of voltages (88-300VDC or 85-  
264VAC) for worldwide operability or dual-input, reversible  
polarity, 12VDC, 24VDC and 48VDC power supply inputs for  
high availability applications requiring backup power inputs.  
.
.
.
.
.
The RS930L's superior ruggedized design coupled with the  
embedded Rugged Operating System (ROS™) provides  
improved system reliability and advanced networking features  
making it ideally suited for creating Ethernet networks for  
mission-critical, real-time, control applications.  
Universal Power Supply Options  
.
Fully integrated power supply (no external adaptors)  
.
Universal high-voltage range: 88-300VDC or 85-264VAC  
.
Dual low-voltage DC inputs: 24VDC (9-36VDC)  
or 48VDC (36-72VDC)  
I
I
SSRUGGEDCOM  
9001:2000  
9001:20 0  
O
O
.
Terminal blocks for reliable maintenance  
All RuggedCom products are backed by a five year warranty  
and unsurpassed technical support.  
free connections  
CSA/UL 60950 safety approved to +85°C  
CERTIFIED  
.
RuggedVDSLTM RS930L  
1
 
RuggedVDSL™ RS930L  
6-Port Managed Ethernet Switch with Dual Port Ethernet over VDSL Uplinks  
Network Architecture  
Control Room  
VDSL  
RS930L  
RS920L  
Up to 40Mbps  
RS900L  
Up to 5km  
RS910L  
VDSL  
Up to 40Mbps  
Up to 5km  
Up to 100Mbps  
Up to 90km  
VDSL  
IED  
IED  
Fiber  
VoIP  
Phone  
VDSL  
Serial  
VoIP  
Phone  
IED  
Serial  
Video  
IED  
Video  
Serial  
Video  
Serial  
RS900L  
RS910L  
RS920L  
RS930L  
8 Port Managed Switch with  
Ethernet over VDSL Uplink  
Serial and Ethernet Device  
Server with Ethernet over  
VDSL Uplink  
Dual Port Ethernet over  
VDSL with Integrated  
Dual Port Serial Server  
6 Port Managed Switch  
with Dual Port Ethernet over  
VDSL Uplink  
1 Ethernet over VDSL  
interface  
Up to 8 fast Ethernet ports  
Copper and fiber options  
Use to aggregate Ethernet  
enabled devices at  
1 Ethernet over VDSL  
interface  
2 RS485/RS422/RS232  
Serial ports (DB9 or RJ45)  
Optional 2 Ethernet ports  
– copper of fiber  
Use to network enable  
legacy serial devices at  
remote locations  
2 Ethernet over VDSL  
interfaces  
2 RS485/RS422/RS232  
Serial ports (DB9 or RJ45)  
Use as a serial drop point  
for a ring or bus  
2 Ethernet over VDSL  
interfaces  
6 Port Managed Ethernet  
Switch - copper interfaces  
Use as an Ethernet drop  
point for a ring or bus  
network topology  
Span over hundreds of  
kilometers using existing  
telephone grade cables  
remote locations back to  
a central point  
network topology  
RuggedVDSLTM RS930L  
3
 
RuggedVDSL™ RS930L  
6-Port Managed Ethernet Switch with Dual Port Ethernet over VDSL Uplinks  
TM  
ROS Features  
Cyber Security  
A configurable "weighted fair queuing" algorithm controls how  
Cyber security is an urgent issue in many industries where  
advanced automation and communications networks play  
a crucial role in mission critical applications and where high  
reliability is of paramount importance. Key ROS™ features that  
address security issues at the local area network level include:  
frames are emptied from the queues.  
VLAN (IEEE 802.1q)  
Virtual local area networks (VLAN) allow the segregation  
of a physical network into separate logical networks with  
independent broadcast domains. A measure of security is  
provided since hosts can only access other hosts on the  
same VLAN and traffic storms are isolated. ROS™ supports  
802.1q tagged Ethernet frames and VLAN trunks. Port  
based classification allows legacy devices to be assigned  
to the correct VLAN. GVRP support is also provided to  
simplify the configuration of the switches on the VLAN.  
.Passwords - Multi-level user passwords secures switch  
against unauthorized configuration  
.SSH / SSL - Extends capability of password protection  
to add encryption of passwords and data as they cross  
the network  
.Enable / Disable Ports - Capability to disable ports so that  
traffic can not pass  
.802.1q VLAN - Provides the ability to logically segregate  
traffic between predefined ports on switches  
.MAC Based Port Security - The ability to secure ports on  
a switch so only specific Devices / MAC addresses can  
communicate via that port  
.802.1x Port Based Network Access Control - The ability  
to lock down ports on a switch so that only authorized  
clients can communicate via this port  
Link Aggregation (802.3ad)  
The link aggregation feature provides the ability to aggregate  
several Ethernet ports into one logical link (port trunk) with  
higher bandwidth. This provides an inexpensive way to set up  
a high speed backbone to improve network bandwidth. This  
feature is also known as "port trunking", "port bundling", "port  
teaming", and "ethernet trunk".  
IGMP Snooping  
.Radius - Provides centralized password management  
.SNMPv3 - encrypted authentication and access security  
ROS™ uses IGMP snooping (Internet Group Management  
Protocol v1&v2) to intelligently forward or filter multicast traffic  
streams (e.g. MPEG video) to or from hosts on the network.  
This reduces the load on network trunks and prevents  
The ROS™ cyber security features are included to help  
address the various industry specific security standards such  
as NERC CIP, ISA S99, AGA 12, IEC 62443, ISO 17799:2005 packets from being received on hosts that are not involved.  
and PCSRF SPP-ICS.  
ROS™ has a very powerful implementation of  
IGMP snooping that:  
Enhanced Rapid Spanning Tree Protocol (eRSTP™)  
RuggedCom eRSTP allows the creation of fault-tolerant ring  
and mesh Ethernet networks that incorporate redundant links  
that are 'pruned' to prevent loops. eRSTP yields worst-case  
.Can be enabled on a per VLAN basis.  
.Detects and filters all multicast streams regardless of  
whether subscribers exist.  
.Supports "router-less" operation by supporting an  
"active" mode.  
.Restores traffic streams immediately after an RSTP  
topology change.  
1
fault recovery of 5ms times the 'bridge diameter' and allows  
rings of up to 160 switches. For example, a ring of ten  
switches will have fault recovery times under 50ms. eRSTP  
implements both STP and RSTP to ensure interoperability  
with commercial switches unlike other proprietary 'ring'  
solutions.  
SNMP (Simple Network Management Protocol)  
SNMP provides a standardized method for network  
management stations the ability to interrogate devices from  
different vendors. SNMP versions supported by ROS™ are  
v1, v2c, and v3. SNMPv3 in particular provides security  
features (such as authentication, privacy, and access control)  
not present in earlier SNMP versions. ROS™ also supports  
numerous standard MIBs (Management Information Base)  
allowing for easy integration with any network management  
system (NMS).  
Quality of Service (IEEE 802.1p)  
Some networking applications such as real-time control  
or VoIP (voice over IP) require predictable arrival times for  
Ethernet frames. Switches can introduce latency in times  
of heavy network traffic due to the internal queues that buffer  
frames and then transmit on a first come first serve basis.  
ROS™ supports 'Class of Service' in accordance with IEEE  
802.1p that allows time critical traffic to jump ahead to the  
front of the queue thus minimizing latency and reducing jitter  
to allow such demanding applications to operate correctly.  
ROS™ allows priority classification by port, tags, MAC  
address, and IP type of service (TOS).  
RuggedVDSLTM RS930L  
4
 
RuggedVDSL™ RS930L  
6-Port Managed Ethernet Switch with Dual Port Ethernet over VDSL Uplinks  
TM  
ROS Features  
SNMP (Simple Network Management Protocol) (cont’d)  
Port Configuration and Status  
A feature of SNMP supported by ROS™ is the ability to  
generate "traps" upon system events. A NMS can record  
traps from multiple devices providing a powerful network  
ROS™ allows individual ports to be 'hard' configured  
for speed, duplex, auto-negotiation, flow control and more.  
This allows proper connection with devices that do not  
negotiate or have unusual settings. Detailed status of ports  
with alarm and SNMP trap on link problems aid greatly in  
system troubleshooting.  
TM  
troubleshooting tool. RuggedVue is RuggedCom's NMS  
that provides graphical visualization of the network and is  
fully integrated with all RuggedCom products.  
SNTP (Simple Network Time Protocol)  
Port Statistics and RMON (Remote Monitoring)  
ROS™ provides continuously updating statistics per port  
that provide both ingress and egress packet and byte  
counters as well as detailed error figures. Also provided  
is full support for the RMON statistics, history, alarms, and  
event groups. RMON allows for very sophisticated data  
collection, analysis and detection of traffic patterns.  
SNTP automatically synchronizes the internal clock of all  
ROS™ devices on the network. This allows for correlation  
of time stamped events for troubleshooting.  
SCADA and Industrial Automation  
ROS™ contains features that optimize network performance  
and simplify switch management based on the unique  
requirements found in SCADA and industrial automation  
applications. Features such as Modbus TCP management for  
retrieval of switch data using the ubiquitous Modbus protocol  
and DHCP Option 82, a Rockwell Automation ODVA  
requirement for IP address assignment based on the location  
of the end device, provide capabilities not found in typical  
"commercial" or "office grade" Ethernet switches.  
Event Logging and Alarms  
ROS™ records all significant events to a non-volatile  
system log allowing forensic troubleshooting. Events  
include link failure and recovery, unauthorized access,  
broadcast storm detection, and self-test diagnostics  
among others. Alarms provide a snapshot of recent  
events that have yet to be acknowledged by the network  
administrator. An external hardware relay is de-energized  
during the presence of critical alarms allowing an  
external controller to react if desired.  
Port Based Network Access Control (802.1x)  
ROS™ supports the IEEE 802.1x standard that defines  
a mechanism for port-based network access control which  
provides a means of authenticating and authorizing  
devices attached to LAN ports.  
HTML Web Browser and Telnet User Interfaces  
ROS™ provides a simple, intuitive user interface for  
configuration and monitoring via a standard graphical  
web browser or via Telnet. All system parameters include  
detailed on-line help to make setup a breeze. ROS™ ,  
presents a common look and feel and standardized  
configuration process allowing easy migration to other  
RuggedCom managed products.  
Port Rate Limiting  
ROS™ supports configurable rate limiting per port to limit  
unicast and multicast traffic. This can be essential to  
managing precious network bandwidth for service providers.  
It also provides edge security for denial of service  
(DOS) attacks.  
Configuration via ASCII Text File  
Broadcast Storm Filtering  
All configuration parameters are stored in an ASCII  
formatted text file that can easily be transferred via TFTP  
or Xmodem. The configuration file can be saved for  
backup purposes and easily manipulated by a text editor.  
The same text file can be downloaded to the switch at  
a later date in order to re-configure or restore  
a previous configuration.  
Broadcast storms wreak havoc on a network and can cause  
attached devices to malfunction. This could be disastrous on  
a network with mission critical equipment. ROS™ limits this  
by filtering broadcast frames with a user-defined threshold.  
Link Fault Indication™  
Some intelligent electronic devices (IEDs) have dual fiber  
optic ports with automatic failover to a backup port should the  
primary fail. ROS™ ensures this mechanism works reliably  
under all failure modes by appropriately disabling link signals  
when required. ROS™ also flushes learned MAC addresses  
to ensure the failover occurs quickly.  
Command Line Interface (CLI)  
A command line interface can be used in conjunction  
with remote shell to automate data retrieval, configuration  
updates, and firmware upgrades. A powerful SQL-like  
capability allows expert users the ability to selectively  
retrieve or manipulate any parameters the device  
has to offer.  
Port Mirroring  
ROS™ can be configured to duplicate all traffic on one port  
to a designated mirror port. When combined with a network  
analyzer, this can be a powerful troubleshooting tool.  
RuggedVDSLTM RS930L  
5
 
RuggedVDSL™ RS930L  
6-Port Managed Ethernet Switch with Dual Port Ethernet over VDSL Uplinks  
EMI and Environmental Type Tests  
IEC 61850-3 EMI TYPE TESTS  
TEST  
Description  
Test Levels  
Severity Levels  
Enclosure Contact  
Enclosure Air  
Enclosure ports  
+/- 8kV  
+/- 15kV  
20 V/m  
4
4
x
IEC 61000-4-2  
IEC 61000-4-3  
ESD  
Radiated RFI  
Signal ports  
+/- 4kV @ 2.5kHz  
+/- 4kV  
x
4
4
4
D.C. Power ports  
A.C. Power ports  
IEC 61000-4-4  
Burst (Fast Transient)  
+/- 4kV  
3
+/- 4kV  
Earth ground ports  
Signal ports  
D.C. Power ports  
A.C. Power ports  
+/- 4kV line-to-earth, +/- 2kV line-to-line  
+/- 2kV line-to-earth, +/- 1kV line-to-line  
+/- 4kV line-to-earth, +/- 2kV line-to-line  
4
3
4
IEC 61000-4-5  
IEC 61000-4-6  
Surge  
Signal ports  
10V  
10V  
10V  
3
3
3
D.C Power ports  
A.C. Power ports  
Induced (Conducted) RFI  
3
10V  
3
Earth ground ports  
Enclosure ports  
IEC 61000-4-8  
IEC 61000-4-29  
Magnetic Field  
40 A/m continuous, 1000 A/m for 1 s  
30% for 0.1s, 60% for 0.1s, 100% for 0.05s  
N/A  
N/A  
D.C. Power ports  
Voltage Dips & Interrupts  
30% for 1 period, 60% for 50 periods  
N/A  
N/A  
A.C. Power ports  
2
IEC 61000-4-11  
IEC 61000-4-12  
100% for 5 periods, 100% for 50 periods  
2.5kV common, 1kV diff. mode@1MHz  
2.5kV common, 1kV diff. mode@1MHz  
2.5kV common, 1kV diff. mode@1MHz  
30V Continuous, 300V for 1s  
30V Continuous, 300V for 1s  
10%  
2kVac (Fail-Safe Relay output)  
2kVac  
2kVac  
5kV (Fail-Safe Relay output)  
5kV  
5kV  
Signal ports  
D.C. Power ports  
A.C. Power ports  
Signal ports  
D.C. Power ports  
D.C. Power ports  
Signal ports  
D.C. Power ports  
A.C. Power ports  
Signal ports  
D.C. Power ports  
A.C. Power ports  
3
3
3
4
4
Damped Oscillatory  
IEC 61000-4-16  
IEC 61000-4-17  
Mains Frequency Voltage  
Ripple on D.C. Power Supply  
3
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
IEC 60255-5  
IEC 60255-5  
Dielectric Strength  
H.V. Impulse  
IEEE 1613 (C37.90.x) EMI IMMUNITY TYPE TESTS  
Test  
Description  
Test Levels  
Severity Levels  
Enclosure Contact  
Enclosure Air  
Enclosure ports  
Signal ports  
D.C. Power ports  
A.C. Power ports  
Earth ground ports3  
Signal ports  
D.C. Power ports  
A.C. Power ports  
Signal ports  
D.C. Power ports  
A.C. Power ports  
Signal ports  
D.C. Power ports  
A.C. Power ports  
+/- 8kV  
+/- 15kV  
35 V/m  
+/- 4kV @ 2.5kHz  
+/- 4kV  
+/- 4kV  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
IEEE C37.90.3  
IEEE C37.90.2  
ESD  
Radiated RFI  
IEEE C37.90.1  
IEEE C37.90.1  
Fast Transient  
Oscillatory  
+/- 4kV  
2.5kV common mode @1MHz  
2.5kV common, 1kV diff. mode@1MHz  
2.5kV common, 1kV diff. mode@1MHz  
5kV (Fail-Safe Relay output)  
5kV  
5kV  
2kVac  
2kVac  
2kVac  
IEEE C37.90  
IEEE C37.90  
H.V. Impulse  
Dielectric Strength  
Environmental Type Tests  
Description  
Test  
IEC 60068-2-1  
IEC 60068-2-2  
Test Levels  
-40°C, 16 Hours  
+85°C, 16 Hours  
Severity Levels  
Cold Temperature  
Dry Heat  
Test Ad  
Test Bd  
N/A  
N/A  
95% (non-condensing), 55°C , 6  
cycles  
IEC 60068-2-30  
Humidity (Damp Heat, Cyclic)  
Test Db  
N/A  
IEC 60255-21-1  
IEC 60255-21-2  
Vibration  
Shock  
Tests Fc  
Tests Ea  
2g @ (10 - 150) Hz  
30g @ 11mS  
Class 2  
Class 2  
Notes: 1. Class 2 refers to "Measuring relays and protection equipment for which a very high security margin is required or where the vibration levels are very high, ( e.g. shipboard application and for severe transportation conditions")  
RuggedVDSLTM RS930L  
6
 
RuggedVDSL™ RS930L  
6-Port Managed Ethernet Switch with Dual Port Ethernet over VDSL Uplinks  
Technical Specifications  
Power Supply  
Network Management  
.
.
Power Consumption: 10W MAX  
ROSVue HTTP graphical web-based  
.
.
24VDC: 9-36VDC, 0.4A  
SNMP v1, v2c, v3  
.
.
48VDC: 36-72VDC, 0.2A  
Telnet, VT100  
.
.
HI Voltage AC/DC: 88-300VDC, 85-264VAC, 0.1A  
Command Line Interface (CLI)  
Critical Alarm Relay  
Form-C failsafe contact relay: 1A@30VDC  
IEEE Compliance  
.802.3-10BaseT  
.
.802.3u-100BaseTX, 100BaseFX  
.802.3x-Flow Control  
.802.3z-1000BaseLX  
.802.3ab-1000BaseTX  
.802.3ad-Link Aggregation  
.802.1D-MAC Bridges  
.802.1D-Spanning Tree Protocol  
.802.1p-Class of Service  
.802.1q-VLAN Tagging  
.802.1D-2004 -Rapid Spanning Tree Protocol  
.802.1x-Port Based Network Access Control  
Physical  
.
Height: 7.4" / 18.8cm  
.
Width: 2.6" / 6.6cm  
.
Depth: 5.0" / 12.7cm  
.
Weight: 2.7lbs / 1.22kg  
.
Ingress Protection: IP40 (1mm objects)  
.
Enclosure: 20 AWG galvanized steel enclosure  
.
Mounting: DIN rail or panel mounted  
Switch Properties  
.
Switching method: Store & Forward  
IETF RFC Compliance  
.RFC768-UDP  
.
Switching latency: 8 us (100Mbps)  
.
Switching bandwidth: 1.8Gbps  
.RFC783-TFTP  
.
MAC address table size: 16kbytes  
.RFC791-IP  
.
Priority Queues: 4  
.RFC792-ICMP  
.
Frame buffer memory: 1 Mbit  
.RFC793-TCP  
.
VLANs: 64  
.RFC826-ARP  
.
IGMP and static multicast groups: 256  
.RFC854-Telnet  
.
Port rate limiting: 128kbps, 256, 512, 4, 8Mbps  
.RFC894-IP over Ethernet  
.RFC1112-IGMP v1  
.RFC1519-CIDR  
.
No head of line blocking  
Approvals  
.RFC1541-DHCP (client)  
.RFC2030-SNTP  
.RFC2068-HTTP  
.RFC2236-IGMP v2  
.RFC2284-EAP  
.RFC2475-Differentiated Services  
.RFC2865-Radius  
.RFC3414-SNMPv3-USM  
.RFC3415-SNMPv3-VACM  
.
ISO: Designed and manufactured using a ISO9001: 2000  
certified quality program  
.
CE Marking  
.
Emissions: FCC Part 15 (Class A),  
EN55022 (CISPR22 Class A)  
.
Safety: cCSAus (Compliant with CSA C22.2 No. 60950,  
UL 60950, EN60950)  
.
Laser Eye Safety (FDA/CDRH): Complies with 21  
CFR Chapter1, Subchapter J.  
IETF SNMP MIBS  
EMI Immunity and Environmental Compliance  
.
RFC1493-BRIDGE-MIB  
.
IEC 61000-6-2 Industrial (Generic)  
.
RFC1907-SNMPv2-MIB  
.
IEC 61800-3 Industrial (Variable Speed Drive Systems)  
.
RFC2012-TCP-MIB  
.
IEC 61850-3 Electric Utility Substations  
.
RFC2013-UDP-MIB  
.
IEEE 1613 Electric Utility Substations  
.
RFC2578-SNMPv2-SMI  
.
NEMA TS 2 Traffic Control Equipment  
.
RFC2579-SNMPv2-TC  
.
RFC2819-RMON-MIB  
Warranty  
.
RFC2863-IF-MIB  
.
5 Years-Applicable to design or manufacturing  
.
draft-ietf-bridge-rstpmib-03-BRIDGE-MIB  
related product defects.  
.
draft-ietf-bridge-bridgemib-smiv2-03-RSTP-MIB  
.
IANAifType-MIB  
RuggedVDSLTM RS930L  
7
 
RuggedVDSL™ RS930L  
8-Port Managed Ethernet Switch with EoVDSL Uplinks  
Fiber Specifications and Mechanical Drawing  
Fiber Optical Specifications  
Parameter  
Mode  
Connectors  
Fiber Port Type  
Multimode  
MTRJ / ST / SC  
2
1310  
50 or 62.5/125  
-15.7  
Singlemode  
LC / SC / ST  
50  
1310  
8 or 9/125  
-2.5  
Typical Dist. (km)  
Optical Wavelength (nm)  
Cable SizeCore/Cladding (um)  
Tx Power (dBm)  
20  
90  
-15.5  
-32  
16.5  
2.5  
-39  
41.5  
Rx Sensitivity (dBm)  
Typical Budget (dB)  
-33.5  
17  
-37  
34.5  
Longer segment lengths dependent on fiber specifications. Consult factory for further details.  
RuggedVDSLTM RS930L  
8
 
RuggedVDSL™ RS930L  
6-Port Managed Ethernet Switch with Dual Port Ethernet over VDSL Uplinks  
Order Codes  
RS930L -___ - ___ - ____ - ____  
PS VV1 VV2  
M
Base Unit includes 6 10/100 BaseTX Ethernet Ports  
PS: Power Supply  
.
24 = 24VDC (9-36VDC)  
.
48 = 48VDC (36-72VDC)  
.
HI = 87-264VAC OR 88-300VDC  
M: Mounting Option  
.
D = DIN Rail  
.
P = Panel Mount  
.
N = None  
VV1, VV2: VDSL Interface  
V1 = Standard reach (<2.5km)  
V2 = Long Reach (5km) Master / CO  
V3 = Long Reach (5km) / CPE  
Options  
82-01-0002 - Conformal Coating  
Power Cables  
43-10-0008 - Bare-wire  
43-10-0007 - with lugs  
RuggedCom Inc.  
30 Whitmore Road  
Woodbridge, Ontario, Canada L4L 7Z4  
Tel: (905) 856-5288 Fax: (905) 856-1995  
Toll Free: (888) 264-0006  
Technical Support Center: (866) 922-7975 or (954) 922-7975  
© 2007 RuggedCom Inc.  
RuggedVDSL is a trademark of RuggedCom Inc.  
Ethernet is a trademark of the Xerox Corporation.  
Patent Pending  
All specifications in this document are subject to change without notice.  
Preliminary Rev 1-J  
For additional information on our products and  
RuggedVDSLTM RS930L  
9
 

Ramsey Electronics Stereo System AA7 User Guide
RCA Home Theater System RTD316W User Guide
RCA Speaker YS1052 User Guide
Remington Styling Iron S 1008 User Guide
Rolls Network Card RPM26 User Guide
Ruckus Wireless Network Card MF2501 User Guide
Samsung Digital Camera BW 4302 User Guide
Samsung DVD Player DVD HD850 User Guide
SanDisk Computer Drive Cruzer Professional User Guide
Sanyo Battery Charger UF102248P User Guide